Stainless 440C steel can be tempered by soaking at 148°C (300°F). Steel 440c hardness at approximately Rockwell C 60 will be obtained. To remove peak stresses and yet retain maximum hardness, temper at least one hour at 300/350ºF (149/177ºC). Hardening of 440C Steel; Stainless steel 440C grade can be hardened by heating at 760°C (1400°F).
Atlas Grade datasheet 440C rev May 2008 July 2010.
The information contained in this datasheet is not an exhaustive statement of all relevant information. It is a general guide for customers to the products and services available from Atlas Steels and no representation is made or warranty given in relation to this document or the products or …
It mainly introduce the chemical composition,mechanical properties, heat treatment, processing performance and performance standards about SUS440C.For various specification of steel production and processing to provide the standard production,we have the professional experience for SUS440C.We can also produce it according to the AISI, UNS, SAE, ASTM, DIN, JIS technical standard.
Datasheet for Steel Grades Stainless Steel SUS440C
Physical properties, Mechanical properties, Heat treatment, and Micro structure This page is mainly introduced the SUS440C Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of SUS440C,such as it is
440C Stainless Steel Products and Specifications - Penn
Grade 440C stainless steel is a high carbon martensitic stainless steel. It has high strength, moderate corrosion resistance, and good hardness and wear resistance. Grade 440C is capable of attaining, after heat treatment, the highest strength, hardness and wear resistance of all the stainless alloys.
The graph bars on the material properties cards further below compare AISI 440C stainless steel to: wrought martensitic stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A …
Stainless steels are high-alloy steels which have high corrosion resistance compared to other steels due to the presence of large amounts of chromium. Based on their crystalline structure, they are divided into three types such as ferritic, austenitic, and martensitic steels.
S45C Steel For Machine Structural Use JIS G4051 - Special
So if you need to surface hardness, but also hopes to play 45 # steel superior mechanical properties, often 45 # steel surface carburizing, so you can get the required surface hardness. JIS S45c steel are mainly used for a variety of motor shaft, automotive parts.
JIS G4309 Grade SUS440C Stainless Steel - Matmatch
Tempering above 400 o C is not recommended as it will result in a reduction in corrosion resistance and impact properties.*Heating temperatures, rate of heating, cooling and soaking times will vary due to factors such as work piece size/shape, also furnace type employed, quenching medium and work piece transfer facilities etc.
AISI 400C is a high carbon chromium steel is designed to provide stainless steel properties with maximum hardness. After heat-treatment Type 440C attains the. 440C - Wikipedia, the free encyclopedia SUS440C . May 20, 2016 Grade 440C stainless steel is capable of attaining, after heat treatment, the highest strength, hardness and wear
Precision bearings, anti-friction bearings, special valves, conveyor belts and rollers, ballpoint pens. They are used in foodstuff, medical instruments, quick couplings, recirculating ball bearings, knotting devices, oil refinery devices.
Stainless Steel AISI 440C (Martensitic) - VTLG Europe
Stainless Steel AISI 440C (Martensitic) These balls give maximum hardness with good corrosion resistance to fresh water, steam, crude oil, gasoline, alcohol, food environment, blood and perspiration. In addition this material is ferro-magnetic and makes a fair permanent magnet.
440C is a 400 series stainless steel, and is the highest carbon content from 400 stainless steel series. It is usually heat treated to reach hardness of 58–60 HRC. It is a bearing steel, and used in rolling contact stainless bearings, e.g. ball and roller bearings.
440C stainless steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of 440C stainless steel in round bar, diameters. 440C grade provides good wear resistance combined with moderate corrosion resistance in mild environments and has excellent hardenability. 440C is very similar to the 440B grade but with a slightly higher carbon content.